XLB-1200*2700 Large rubber vulcanizing press / Frame Type Rubber Vulcanizer
Following is machine application
It is mainly used to vulcanize various kind rubber material , such as raw rubber , silicone rubber , NBR rubber , EPDM and so on , to produce various kind of rubber product , such as seals , o-ring , soles , tiles , etc
Following are machine features
1,Cylinder adopts advanced seals constructure , it owns reasonable design with reliable function
2.Cylinder is made of QT-500-7
3.Beam and plateform are all welded by high quality Q-235A carbon steel.
4.Hot plate is welded by high quality Q-235A carbon steel.
5.Seal is PU seals , it is oil resistant , anti-aging , wear resistant
6.Heating shield: its calcium silicate board, pressing pressure is 3.5Mpa , coefficient of heat insulation is 0.031
Following is technical parameter for reference
Diameter of piston
It is mainly in use of vulcanizing various kinds of rubber pattern products.
1) The body use frame type, mainly consist of top crossing, plate, table, piston, hydraulic cylinder and frame. We put asbestos board between plate and top crossing, table, for its good heat insulation. Use polyurethane material sealing ring between piston and hydraulic cylinder with good sealing property. The piston material is chilled cast iron, hydraulic cylinder material is ductile cast iron, weldment between top and bottom crossing.
2) Put holder and oil cylinder at the side of plate, push-off and reseting moulds are finished by oil cylinder moving when using. There is not ejecting holder in manual ejecting mould structure ,but still convenient when using.
3) Hydraulic system is consist of unipump, operating valve and control system.
4) Electric system is consist of oil pump motor and vulcanizing timing. When working pressure reach 22.1 mpa, electro connecting pressure gauge control, time relay on the faceplate is used for setting vulcanizing time. When reach the setting time, it will warn automatically, push TA button can remove warning.