10L Rubber Kneader for Laboratory
|FOB Unit Price:||US $9,800 US $9,500|
|Purchase Qty. (Sets)||FOB Unit Price|
|Production Capacity:||65 Sets/Month|
|Payment Terms:||L/C, T/T|
- Model NO.: x(s)n-10
- Control Type: PLC
- Power Source: Electric
- Natural Rubber Mixer: Good Sealing: No Powder Leakage, Leakage of Materi
- Free of Charge a Seal Copper Ring: The Rotor Is Good Quality
- Trademark: QSY
- Specification: TC-1200
- HS Code: 84778000
- Warranty: 2 Years
- Automatic Grade: Semi-Automatic
- Type: Rubber Cutting Machine
- 5-6 Mins One Time: There Won′t Be Any Loss in 5 Years
- The Noise Is Small: Flip Effect Is Good.
- Transport Package: in Bulk
- Origin: Qingdao China
10L rubber kneader for laboratory
Small 10 l mixer, small 10 liter mixer, experimental 10 l mixer, experimental 10 liter mixer, rubber 10 l mixer Applies to mixing of various kinds of rubber products, scattered, plasticizing half forming experiment and the first choice equipment. It has the advantage of light quality. Small volume, simple structure, easy operation, low energy consumption, easy to use and repair etc.
Small 10 liter mixer parameters:
Mixing capacity: 10 l
Drive motor: 18.5 KW
Flip motor: 2.2 KW
Flip Angle: 110 °
8 kw electric heating:
Production: 8-12 kg/time
Machine size: 2 * 1.35 * 1.35 M
The machine weighs about: 1800 kg
Mixer to day
1: check whether the workings of the mixer is normal, handle in time when problems found.
2: check the mixer gas path, lubricating oil and hydraulic oil with and without leakage.
The bearing part 3: check the mixer temperature is normal.
4: check whether there is any leakage on mixer rotor end face sealing glue phenomenon.
5: check mixer each indicating instrument display is normal.
Other kneader instruction
1. With completely condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent stale quality
2. Spiral angle and over lapping length of blades of the rotors are of reasonable design and make the materials to be dispersed uniformly
3. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant
4. Jacket construction is adopted in parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber processing technology.
Technical Parameter Of Rubber Kneader
Total Volume of mixing chamber(L)
Working Volume of mixing chamber(L)
Driving motor power(KW)
Tilting motor power(KW)
Rotational speed of the rotor(front/rear)
Pressure of compressed air(Mpa)
Cooling wate presssure (Mpa)